Strong Points
Function
ATyS g are 3 or 4 pole automatic transfer switches, with positive break indication. They incorporate all the functions offered by the ATyS r, as well as functions intended for mains/mains and mains/genset applications.
In automatic mode they enable the monitoring of, and the on-load changeover between, two power supply sources, in accordance with the parameters configured via potentiometers and DIP switches. Remote monitoring of the ATyS g is possible with the optional RS485 communication module.
They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer
Advantages
Rapid commissioning
ATyS g switches offer significant time saving during commissioning (process takes 2 to 3 minutes). Owing to the design that allows commissioning through just four potentiometers and four DIP switches, a screwdriver is all that is required to configure the parameters.
For added simplicity, they also offer an autoconfiguration function which enables automatic adjustment of the rated voltage and frequency.
Specifically designed for mains/mains and mains/genset applications
The ATyS g’s integrated controller has been designed to provide specific functions for these applications (genset startup, on-load or off-load tests...) together with the monitoring of the voltage and frequency of both sources for three-phase and single-phase networks.
The generator supply must be connected to switch II, located at the rear.
RS485 communication
An optional RS485 communication module (p/n 4825 0092) can be fitted to the AtyS g controller.
It allows remote monitoring of available power sources and their parameters, timers, as well as displaying the product’s status and configuration.
Communication speed is up to 38400 bauds
More robust
The updated design includes metal mounting legs across the entire ATyS range, improving the overall robustness of the switches. It also allows an easier and trouble-free mounting of the switches on a back plate with preassembled screws.
Applications
- Data center - Power availability for precision cooling
- Data center - Power availability for telecom
- Infrastructure & Transport - Power for railway signaling
- Industry - Power availability for industrial process
- Building - Power availability for life safety
- Building - Energy storage behind the meter
- Building - Power availability for IT infrastructure
Tutorial
How to commission an automatic transfer switch ATyS g
Environmental data
RoHS compliant
PEP ecopassport® available
"A company's performance is measured not only by its financial success, but also and above all by its positive impact on society and the environment. This vision guides our every action and decision, and anchors sustainable development at the heart of our strategy. This commitment is embodied in the ACT 360 program."
Ivan STEYERT - SOCOMEC Group CEO
