The MODULYS XL is a modular UPS based on 200 kW power modules. The power of a single UPS unit can be increased up to 1200 kW and the system can include up to 4 units in parallel. The innovative MODULYS XL concept allows for the constant protection of the load in online mode, whether to respond to load growth or to manage all aspects of the system’s lifecycle, in a secure way and with impressive rapidity.
Associated with a variety of adapted Services, the MODULYS XL provides unprecedented availability and flexibility to fulfil the requirements of today’s highly critical applications.
Fault-tolerant power without compromise
Fully redundant architecture for maximum availability, minimum MTTR and risk free maintenance.
3 standard bricks for your very own system
- UPS configurations based on 3 standard bricks for a simplified installation process.
- Repeatable and standardised assets to meet different configuration and architectural requirements.
- An adjustable number of empty power slots to match different scalability and redundancy needs.
- Complete UPS customisation without modifying the core standardised bricks.
- Quality, simplicity of construction and ease of operation.
- Power module addition or removal in only 5 minutes by one person.
- Simple and safe power module plug-in: no power or communication bus cabling required.
- Load fully protected in double conversion mode during the power extension or module swap.
- Hot-scale and swap process in incremental steps of 200 kW to reduce time and optimise costs.
- Automatic power module self-configuration and testing before connection.
- Firmware auto-alignment.
- No installation rework when a new capacity is required.
- Off-powered connection of the power module to prevent electrical arcing upon plug-in and plug-out.
Safe and easy deployment
- Specifically engineered to eliminate unexpected installation errors.
- Easy power slot positioning and perfect alignment including on uneven floors.
- Power slots with pre-engineered built-in bus bars for quick, easy and clean interconnections.
- A full frontal access installation so the UPS can be installed against a wall.
- The power slots set up during the installation stage are ready for future hot plug-in power modules.
- Safe and easy power module handling.
- Full system heat-run test capability during commissioning without the need for an external load bench.
Concurrent and risk-free maintenance
- Concurrent maintenance of all components.
- Safe power module maintenance - outside of the running system.
- Both the power modules and the static bypass can be maintained while the load remains fully protected in double conversion mode.
- No in-situ maintenance, service or repair that may jeopardise the running system.
- Fully extractable power modules and subassemblies and complete access to all components, reducing the MTTR.
- Built-in means to perform an exhaustive pre-test after the module’s maintenance.
|Power Module rated power||200kVA/kW|
|Unit rated power||200 to 1200kVA/kW|
|Number of Power Modules||1 to 6|
|Number of Power Slots||1 to 6|
|Number of Units per System||up to 4 units in parallel|
|Voltage||400V 3ph (200 to 480V(1))|
|Power factor||1 (according to IEC/EN 62040-3)|
|Voltage||400V 3ph+N (380/415V configurable)|
|Frequency||50/60Hz (configurable) ±0.01Hz - free-running|
|Voltage distortion (Ph/Ph)||ThdU ≤1.5% (linear load)|
|Voltage||rated output voltage ±15% (configurable)|
|Frequency||rated output frequency ±5Hz (configurable for Genset compatibility)|
|Dimensions W x D x H (mm)||1200 x 975 x 2120|
|Dimensions W x D x H (mm)||550 x 975 x 2120|
|Dimensions W x D x H (mm)||500 x 950 x 1940|
|Type||Hot plug-in / Hot-swappable|
|Online efficiency (double conversion mode)||up to 97%|
|Operating ambient temperature||from 0°C to +40°C|
|Relative humidity||0-95% without condensation|
|Maximum altitude||1000m without derating|
|Acoustic level at 1m||<75dBA|
|Short-circuit withstanding (Icw)||100kA - Symmetrical|
|Product declaration||CE, EAC|
(1) Conditions apply.
(2) At full rated voltage; with input THDV <1%.
- Separated inputs (rectifier, bypass).
- Top or bottom cable entry.
- Backfeed protection: detection circuit.
- Redundant bypass cooling.
- Distributed batteries (1 per module).
- Battery temperature sensor.
- Module heat-run test(3).
- Full system heat run test(3).
- 63 A three-phase plug.
System or product options
- Input, output and maintenance bypass switches.
- 3-wire bypass and output distribution kit.
- PEN kit for TN-C grounding system.
- 4-wire rectifier (neutral connection kit).
- Shared batteries (1, 2 or 3 per unit).
- Enhanced battery charger.
- Battery tripping kit.
- Unit parallelisation kit.
- Redundant electronic power supplies.
- BCR (Battery Capacity Re-injection).
- ACS synchronisation system.
- Cold start.
- Top roof.
- User-friendly 7” touch-screen multilingual colour graphic display (Power Hub).
- Tricolour display with a number indicating the Power Module status (Power Slot)
- 2 slots for communication options.
- USB port to download the UPS reports and log files.
- Ethernet port for service purposes.
- Dry-contact interface (configurable, voltagefree contacts).
- MODBUS RTU RS485 or MODBUS TCP.
- PROFIBUS / PROFINET gateway.
- BACnet/IP interface.
- NET VISION: professional WEB/SNMP Ethernet interface for secure UPS monitoring and remote automatic shutdown.
- REMOTE VIEW PRO supervision software
- IoT gateway for Socomec cloud services and the SOLIVE UPS mobile app.
- Remote touch-screen panel.
- Additional Com-slot extension.